 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TE13004D * TE13005D Vishay Telefunken Silicon NPN High Voltage Switching Transistor Features D D D D D D D D Monolithic integrated C-E-free-wheel diode HIGH SPEED technology Planar passivation Very short switching times Very low switching losses Very low dynamic saturation Very low operating temperature High reverse voltage 14283 Applications Electronic lamp ballast circuits Switch-mode power supplies Absolute Maximum Ratings Tcase = 25C, unless otherwise specified Parameter Collector-emitter voltage g Test Conditions Type TE13004D TE13005D TE13004D TE13005D Symbol VCEO VCEO VCES VCES VEBO IC ICM IB IBM Ptot Tj Tstg Value 300 400 600 700 9 6 8 2 4 57 150 -65 to +150 Unit V V V V V A A A A W C C Emitter-base voltage Collector current Collector peak current Base current Base peak current Total power dissipation Junction temperature Storage temperature range Tcase 25C Maximum Thermal Resistance Tcase = 25C, unless otherwise specified Parameter Junction case Test Conditions Symbol RthJC Value 2.2 Unit K/W Document Number 86526 Rev. 2, 20-Jan-99 www.vishay.de * FaxBack +1-408-970-5600 1 (9) TE13004D * TE13005D Vishay Telefunken Electrical Characteristics Tcase = 25C, unless otherwise specified Parameter Test Conditions Transistor Collector cut-off current VCE = 600 V VCE = 700 V VCE = 600 V; Tcase = 150C VCE = 700 V; Tcase = 150C Collector-emitter IC = 100 mA; L = 125 mH; breakdown voltage Imeasure = 100 mA (figure 1) Emitter-base IE = 1 mA breakdown voltage Collector-emitter IC = 2 A; IB = 0.4 A saturation voltage Base-emitter saturation IC = 2 A; IB = 0.4 A voltage DC forward current VCE = 2 V; IC = 10 mA transfer ratio VCE = 2 V; IC = 1 A VCE = 2 V; IC = 4 A Dynamic saturation y IC = 2 A; IB = 0.2 A; t = 1 ms voltage IC = 2 A; IB = 0.2 A; t = 3 ms Gain bandwidth product VCE = 10 V; IC = 500 mA; f = 1 MHz Free-wheel diode Forward voltage IF = 2 A Turn-on transient IF = 2 A; diF/dt = 10 A/ms peak voltage Reverse recovery IF = 2 A; diF/dt = 5 A/ms; current VS = 200 V Type Symbol Min Typ Max 50 50 0.5 0.5 300 400 9 0.5 1.6 10 10 4 2.5 0.6 4 V V MHz Unit TE13004D ICES TE13005D ICES TE13004D ICES TE13005D ICES TE13004D V(BR)CEO TE13005D V(BR)CEO V(BR)EBO VCEsat VBEsat hFE hFE hFE VCEsatdyn VCEsatdyn fT mA mA mA mA V V V V V VF VFP IRM 1.2 4 4 1.5 5 V V A www.vishay.de * FaxBack +1-408-970-5600 2 (9) Document Number 86526 Rev. 2, 20-Jan-99 TE13004D * TE13005D Vishay Telefunken Switching Characteristics Tcase = 25C, unless otherwise specified Parameter Test Conditions Resistive load (figure 3) Turn on time IC = 2 A; IB1 = -IB2 = 0.4 A; VS = 125 V Storage time Fall time Inductive load (figure 4) Storage time IC = 2 A; IB1 = 0.4 A; L = 200 mH; Vclamp = 300 V; -VBE = 5 V; V Cross over time Tcase = 100C Free-wheel diode Reverse recovery time IF = 0.5 A; IR = 1 A; iR = 0.25 A Forward recovery time IF = 2 A; diF/dt = 10 A/ms Reverse recovery time IF = 2 A; -diF/dt = 5 A/ms y IF = 2 A; -diF/dt = 5 A/ms Type Symbol ton ts tf ts tc trr tfr trr tIRM Min Typ 0.25 1.5 0.15 1.2 0.4 0.7 0.4 1.1 0.9 Max 0.4 2.5 0.3 2 0.7 1 Unit ms ms ms ms ms ms ms ms ms 95 9666 VF VFP 110% 100% t tfr Figure 1. Turn on transient peak voltage Document Number 86526 Rev. 2, 20-Jan-99 www.vishay.de * FaxBack +1-408-970-5600 3 (9) TE13004D * TE13005D Vishay Telefunken 94 8863 V S2 + 10 V IB IC w Imeasure IC 5 IC V S1 + 0 to 30 V V(BR)CEO tp T tp 3 Pulses + LC VCE V(BR)CEO 100 mW + 0.1 + 10 ms I(BR)R Figure 2. Test circuit for V(BR)CE0 94 8852 IB IB1 0 t RC -IB2 IC (1) IB1 RB VBB + VCE IB VCC IC 0.9 IC 0.1 IC tr td ton t ts toff tf (1) Fast electronic switch Figure 3. Test circuit for switching characteristics - resistive load www.vishay.de * FaxBack +1-408-970-5600 4 (9) Document Number 86526 Rev. 2, 20-Jan-99 TE13004D * TE13005D Vishay Telefunken 94 8853 IB IB1 LC 0 -IB2 IC (1) IB1 RB VBB IB VCE Vclamp (2) IC VCC 0.9 IC t + (1) Fast electronic switch (2) Fast recovery rectifier 0.1 IC t ts tr Figure 4. Test circuit for switching characteristics - inductive load Document Number 86526 Rev. 2, 20-Jan-99 www.vishay.de * FaxBack +1-408-970-5600 5 (9) TE13004D * TE13005D Vishay Telefunken Typical Characteristics (Tcase = 25_C unless otherwise specified) 100 P tot - Total Power Dissipation ( W ) 2.2 K/W 10 12.5 K/W IC - Collector Current ( A ) 10 100 TE13004D TE13005D tp=10ms 50ms 1 100ms 500ms 0.1 tp/Tv0.01 Tcase = 25C 0.01 0 95 10602 1 25 K/W 0.1 0.01 0.001 25 50 75 100 125 150 Tcase ( C ) 50 K/W RthJA = 85 K/W 1ms 5ms DC 100 1000 10000 1 95 10965 10 VCE - Collector Emitter Voltage ( V ) Figure 5. Ptot vs.Tcase - Collector Emitter Saturation Voltage (V) 10 10 Figure 8. IC vs. VCE - Base Emitter Saturation Voltage (V) 1 2A 4A Tcase = 25C IC = 8A 1 0.5A 1A 4A 2A 0.1 IC = 0.5A 1A CEsat T = 25C 0.01 case 0.01 0.1 BEsat 1 10 95 9788 0.1 0.01 V 0.1 1 10 V 95 9789 IB - Base Current (A) IB - Base Current (A) Figure 6. VCEsat vs. IB 100 - Forward DC Current Transfer Ratio - Forward DC Current Transfer Ratio 25 Figure 9. VBEsat vs. IB Tcase = 25C 20 0.5A 15 1A 2A 10 5 0 0 2 4 6 8 10 VCE - Collector Emitter Voltage (V) IC = 4A Tcase = 25C 10V 10 5V VCE = 2V FE h 1 0.01 0.1 1 10 95 9786 95 9785 IC - Collector Current (A) Figure 7. hFE vs. IC h FE Figure 10. hFE vs. VCE www.vishay.de * FaxBack +1-408-970-5600 6 (9) Document Number 86526 Rev. 2, 20-Jan-99 TE13004D * TE13005D Vishay Telefunken 10 t s ,t f - Switching Times ( m s ) R-load 1 ts t s ,t f - Switching Times ( m s ) 10 R-load 1 ts 0.1 tf hFE = 5 IB1 = -IB2 Tcase = 25C 0 1 2 3 4 5 0.1 tf IC = 2A IB1 = 0.4A Tcase = 25C 0 1 2 3 -IB2/IB1 4 5 0.01 95 9908 0.01 95 9909 IC - Collector Current ( A ) Figure 11. ts, tf vs. IC 10 t s ,t f - Switching Times ( m s ) t s ,t f - Switching Times ( m s ) L-load 1 ts 10 Figure 14. ts, tf vs. -IB2/IB1 ts 1 L-load 0.1 tf hFE = 5 IB1 = -IB2 Tcase = 25C 0.1 tf IC = 2A IB1 = 0.4A Tcase = 25C 0 1 2 3 -IB2/IB1 4 5 0.01 0 95 9910 0.01 5 95 9911 1 2 3 4 IC - Collector Current ( A ) Figure 12. ts, tf vs. IC Z thp - Thermal Resistance for Pulse Cond. ( K/W ) 10 DC 1 tp/T = 0.5 Figure 15. ts, tf vs. -IB2/IB1 0.2 0.1 0.05 0.1 0.02 0.01 0.01 0.01 0.1 1 10 100 95 10962 tp - Pulse Length ( ms ) Figure 13. Document Number 86526 Rev. 2, 20-Jan-99 www.vishay.de * FaxBack +1-408-970-5600 7 (9) TE13004D * TE13005D Vishay Telefunken Dimensions in mm 0.52 0.40 4.8 4.4 2.70 2.35 1.40 1.27 1.3 1.0 0.85 0.65 1.5 0.9 E 10.4 9.8 3.8 3.5 C 2.64 2.44 B 1.5 1.2 2.9 2.7 6.7 5.8 4.8 4.3 13.6 12.2 16.0 15.2 Standard Plastic Case 14A 3 DIN 41 869 JEDEC TO 220 94 9184 technical drawings according to DIN specifications Collector connected with metallic surface www.vishay.de * FaxBack +1-408-970-5600 8 (9) Document Number 86526 Rev. 2, 20-Jan-99 TE13004D * TE13005D Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 Document Number 86526 Rev. 2, 20-Jan-99 www.vishay.de * FaxBack +1-408-970-5600 9 (9) |
Price & Availability of TE13005D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |